Get A Quote

Est. 1940 Knowledge for Solutions

Product Lines | Contact Us |   Monday - Friday 7:30AM - 5:00PM Call: 800-777-8772 - 505-247-4036

  800-777-8772    505-247-4036


Product Lines


TP Pump has chosen pump manufacturers that meet your high standards. We know that you depend on us to provide the best product for your requirements. The companies listed below build products that are the best in the business.

Need more info? Get Info.
Found what you want and need a quote? Get Quote.

TP Pump is the ONLY factory authorized service center in New Mexico. We've been distributing the stainless steel ground water, commercial, plumbing & heating Grundfos diverse lines for over twenty years. Substantial inventory is on hand for immediate shipment in our Grundfos trade area.

In 2000, TP Pump became the largest BoosterPaq distributor within the state of New Mexico. We serve all of New Mexico with the exception of six southeastern counties. This variable speed pumping system offers Grundfos superior technology, which not only saves power but also offers durability, selection, service, and ease of installation.

Applications: Metering, Aggressive Fluids, Boiler Feed / Condensate Return, Deep Well, Booster Pumps, Packaged Booster Systems, Solar Pumping, HVAC, Industrial Process Pumps

Hydromatic is a leader in cast iron submersible and self priming pumps for residential, industrial and municipal applications. TP Pump stocks a wide variety of these pumps ranging from effluent to solids handling and even an assortment of grinder pumps. In addition, accessories from "SJ" alarms, switches, and panels are stocked as well as fiberglass basins for the wide range of Hydromatics.

Patterson Pump Company, located in Toccoa, Georgia, is a worldwide leader in the design and manufacture of pumping equipment. Patterson is a wholly owned subsidiary of The Gorman-Rupp Company. Our pumping equipment satisfies urban water and waste water demands as well as the protection of life and property through our fire pump lines.

We also operate Flo-Pak, a business unit of Patterson Pump Company. Flo-Pak manufactures packaged pumping stations for the HVAC, Plumbing, Municipal, and Industrial markets.

Our international facilities include Patterson Pump Ireland, Limited; as well as regional sales offices in Athens, Greece; Nottingham, England; and Bangkok, Thailand.

Patterson Pump Company is committed to producing superior products that meet or exceed the individual needs of our customers. Quality workmanship, superior pump design knowledge, efficient production capability, and careful attention to testing details ensure that every Patterson pump will perform its intended function efficiently, economically and durably.

Applications: Booster Pumps, Fire Protection, Packaged Booster Systems, Industrial Process Pumps, HVAC

Viking Pump is a leader in rotary gear pumps ideal for viscous applications. TP has represented Viking for thirty years. This long relationship has allowed us learn extensively about their product line.

Viking not only manufactures pumps but also the "Lid - Ease" strainer. This strainer is a time saving devise since it is easy to open; in addition its use will save down time on pumps.

Applications: Viscous Material, Metering, Aggressive Fluids

BJM Pumps supplies a wide variety of submersible pumps and pump accessories for many different applications. Some of these products include slurry pumps, stainless steel pumps, corrosion resistant pumps, sump pumps, sewage pumps, trash pumps, sludge pumps, non-clog pumps, solids handling pumps, grinder pumps, cutter pumps, shredder pumps, vortex pumps, submersible dewatering pumps, sand pumps, agitator pumps, utility pumps and specialty pumps such as 12 Volt pumps and residue pumps (or Mop-Up-Pump) TP Pump specializes in their VFD’s and Soft-start controls.

Applications: Sewage and Sump, Dewatering

B|W is now a division of Ametek. B|W manufactures a wide variety of relays ideal for controlling long line pump applications and for aggressive fluids. TP Pump stocks a wide variety of B|W relays, probe holders, and probes.

Applications: Accessories and Related Items, Liquid Level

Danfoss' commitment to the environment has been the basis of our business philosophy for years and the driving force in the development of our products and application knowledge. Danfoss is a well-known partner for major systems suppliers and water plant operators - measured in water quality and process efficiency. That's why you can expect the best from Danfoss.

Applications: Accessories and Related Items, Controls

Federal Pump Corporation was formed in 1927 by a group of experienced, dedicated pump specialists. The market initially was geared towards the commercial heating industry in and around New York City. The pumps furnished then included condensate returns and boiler feed units purchased primarily by heating and mechanical contractors. As business flourished in the mid 1930's the original line was expanded to include end suction centrifugal pumps as well as sump and sewage lift stations. In 1948 the company moved into our present location which encompasses approximately 82,000 sq. ft., to facilitate our sales office as well as machining, welding, assembly, pattern design and service department. We currently have 38 sales representatives in the continental U.S. and, although 7% of our sales are worldwide, we do not have any formal representation. The primary objective of Federal Pump is to provide the best possible equipment for the intended application, considering such factors as performance, efficiency, reliability, initial cost, operating cost, and maintenance cost. We have earned a reputation for quality, good performance, and reliability of our product. Our sales and engineering personnel work with engineers and contractors to insure that the best available unit properly designed and applied is selected. For standard products or something a little out of the ordinary, we will provide application assistance and submit proposals for consideration. While our present designs are the result of decades of development, our continuos consideration for design improvement is a priority. The accuracy of each pump assembly or component is maintained by stringent quality control standards. - Our personnel make every effort to insure that the high level of quality is maintained. From manufacturing drawings to finished products, federal pumps are designed, selected, and manufactured by a group of highly skilled specialists on whom we can rely.

Applications: Boiler Feed / Condensate Return, Sewage and Sump

Flowserve is the recognized world leader in supplying pumps, valves, seals automation and services to the power, oil, gas, chemical and other industries. With more than 14,000 employees in more than 56 countries, we combine our global reach with a local presence. At TP Pump we stock and sell their cartridge mechanical seals.

Applications: Accessories and Related Items, Fluid Sealing

Submersible dewatering pumps for construction and mining applications. Grindex utilizes phase failure protection as well as run dry capability. T-P offers complete service on the Grindex line.

Applications: Sewage and Sump, Slurries, Dewatering

Little Giant offers a competitive line of sump pumps ranging from 1/200 to 7 1/2hp. T-P maintains an extensive inventory of pumps as well as parts for Little Giant.

Applications: Sewage and Sump

March manufactures magnetic drive centrifugal pumps for aggressive applications. Pumps are available in many types of construction. TP has years of experience in selecting the March Pump best for tough applications. In addition to this experience, TP maintains a growing inventory of March products.

Applications: Aggressive Fluids

Micropump is the originator of magnetically driven gear pumps, and is the market leader in sealless, low-flow gear pumps. Capacities range from less then 1gpm to 4 gpm for many types of aggressive fluids needing precise, virtual pulse free pumping.

Applications: Aggressive Fluids, Metering

Price Pump makes a variety of small centrifugal pumps ideal for industrial applications. Their selection includes high head stainless steel centrifugals ideal for laser cooling and cast iron pumps common on OEM machinery.

Applications: Aggressive Fluids, Booster Pumps

Versa-matic manufacturers air driven diaphragm pumps perfect for aggressive applications. TP Pump has a large inventory of Pump and Parts with factory trained technicians rebuilding dozens of Versa-matic Pump per month.

Applications: Aggressive Fluids, Slurries, Viscous Material


TP Pump specializes in providing you with the most knowledgeable solution for all of your pump needs.

TP Pump knows every customer has different needs and one-size-fits-all doesn't cut it in the real world. Nobody understands this better than TP Pump. We will ask you the right questions until we fully understand each aspect of your specific situation and find the correct solution the first time...everytime. If you don't believe us, give us a chance to prove it!